Hexxa Plus – Download Now
Hexxa plus is available with the zJailbreak app store. First, you need to download zJailbreak.
Step 01 – Visit this page from your device safari browser and click on the following button to install zJailbreak. Provide your device passcode for this step.
Step 02 – Now, run zJailbreak from your device and Tap on Hexxa Plus.
Step 03 – Then Click on the “Allow”, then “Download.” Hexxa ++ profile will be downloaded to the iOS 13.2 / iOS 13.2.2 device settings.
Step 04 – Now go to your device “Settings”, then click on “Profile Download.”
Step 05 – You must enter the device passcode to complete the Hexxa plus Installation process.
Step 06 – Once you complete the installation process, you can see the Hexxa plus app on your iOS 13.2 / iOS 13.2.2 device. Now you can install iOS 13.2 / iOS 13.2.2 jailbreak apps to your device using Hexxa plus.
Checkra1n jailbreak for Mac users – Download Now
Step 01 – Download the following dmg file.
Step 02 – Drag the Checkra1n file into the Applications.
Step 03 – Make sure to turn off filevault. Otherwise you cannot run the Checkra1n application on your Mac. Then go to the General tab —> Allow.
Step 04 – Connect the Mac and the device. Then Run the Checkra1n app —> Start —> Next —> wait until spring the device.
Step 05 – Only the iOS 13.2.3 users should enter the device DFU mode manually. Otherwise, your device will not supported for the Checkrain jailbreak. Other version users go head with —> Start again —> Turn the device into DFU mode by pressing Side button and Volume down button as the instructions right of the window.
Step 06 – Now, it will start the jailbreak. Wait until it is complete. After completing the jailbreak process, the Checkra1n app will be added on your device homescreen.
Step 07 – Run the Checkra1n application located on your homescreen. Click on Cydia —> Install Cydia —> Done. Now Cydia on your device.
Video guide for iOS 13.2.3 users.
Trimgo – Download Now
Step 01 – Tap below button to install iOS 13.2++ app. Provide your device passcode.
Step 02 – Now you can see the iOS 13.2++ app on your device homescreen. Open the iOS 13.2++ app.
Step 03 – Swipe for third page from your homescreen. There is Trimgo app. Open the Trimgo app and click on Jailbreak button.
Step 04 – Within a few seconds it will complete the jailbreak process.
Step 05 – Once completed you can see the Cydia on your iOS 13.2 ++ homescreen.
Zeus – Download Now (PC Required)
Step 01 – Tap the following button to install Zeus to your computer.
Step 02 – Then open Zeus tap on “Download iPSW file” to download iPSW file according to your device model.
Step 03 – Now connect your device to the computer. Before starting the process, backup your device, disable find my iPhone and passcode. Enable Airplane mode.
Step 04 – Connect your device to the computer. It will detect your device model and version, then tap on the continue button to go ahead. Select downloaded iPSW file to modify. It will take a few minutes to modify your iPSW.
Step 05 – Then tap on the “Restore” button. Wait until the process is completed. Finally, it will install the Zeus app to your device.
Step 06 – Now you can install Jailbreak tweaks with zeus Open the Zeus app, go to settings, togole on the Jailbreak tweak you want to install, then go back to zeus, on the “Load Tweaks” toggle, tap on jailbreak. It will install the Jailbreak tweaks successfully to your ios 13.2 device.
Bregxi – Download Now
Step 01 – Tap following button from your iOS 13.2 / iOS 13.2.2 iPhone or iPad safari browser. It will require a device passcode.
Step 02 – Then open Bregxi repo extractor from your iOS 13.2 / iOS 13.2.2 iPhone or iPad. Go for “All Source List.” Then copy one of Repo URL you want to extract.
Step 03 – Now go back to Bregxi home page. Paste the copied URL and click the Extract source button.
Step 04 – Repo will be extracted to your iPhone or iPad. Now you can install all jailbreak apps available on extracted repo.
Step 05 – Click on the download button of the app which you want to download. Then it will be downloaded to your iOS 13.2 device settings. Complete the installation process of the app.
zJailbreak – Download Now
Step 01 – Tap the following button to download & install zJailbreak for your iOS 13.2 / iOS 13.2.2 device. Use safari browser.
Step 02 – Once it detects your device system data, zJailbreak profile will be downloaded to your device settings.
Step 03 – Now go to your device settings. Click on the zjailbreak profile, then click “Install” and enter device passcode. Again click “ Install”, “Done.”
Step 04 – Congratulations! Now you can see the zJailbreak app on your iOS 13.2 / iOS 13.2.2 device homescreen.
ApricotiOS – Download Now
Step 01 – Apricot available on zJailbreak app store. You have to download zJailbreak first if you haven’t downloaded it.
Step 02 – Then find Apricot from zJailbreak. Click on “Allow” → “Install” → “Enter the device passcode” → “Install” → “Done.”
Step 03 – Now ApricotiOS will be available on your iOS 13.2 / iOS 13.2.2 iPhone. Run Apricot iOS app from your iPhone and tap on the unlock button.
Step 04 – Now click on jailbreak Apricot iOS>Get the code>Copy the code>Open JB Terminal & Paste the code and Enter.
Step 05 – Finally, Cydia will appear on your Apricot iOS.