Please visit this page from your iOS device

iOS 9.0 - 9.3.5 Jailbreak

Here we discuss the jailbreak solutions  for all iOS 9.0 - 9.3.5 versions. iOS 9.3.5 is the final update for the iOS 9 versions. Jailbreak solution may vary according to the iOS versions and the device. It has two types of jailbreak for these as system rooted and Non system rooted. Please go through the details listed below.

System rooted jailbreak

Full functional Cydia can be installed when complete the system rooted jailbreak. Choose following method to get the full details with the guide.
Phoenix Jailbreak (iOS 9.3.5 )
BetterHomeDepot (iOS 9.1 - iOS 9.3.4)
Pangu9 (iOS 9.0 - iOS 9.3.3)
PP Helper (iOS 9.2 - iOS 9.3.3)

Non system rooted jailbreak

Non System rooted jailbreak is a jailbreak alternative method for all the latest devices and the latest versions. It can only complete partial jailbreak with this. It can not install full functional Cydia using following methods. However some of these jailbreak alternative solutions may not work for iOS 11 jailbreak.
Pangu Anzhuang
Pangu8 JB Installer

Phoenix Jailbreak  for iOS 9.3.5

Users can Jailbreak all the 32-bit devices running iOS 9.3.5 version with Phœnix Jailbreak.This is a Semi-untethered jailbreak.
Compatible devices - iPhone 5, iPhone 5c , iPhone 4s , iPod touch 5 , iPad 2 , iPad 3 , iPad 4 , iPad mini 1.
Please check the Pangu Anzhuang Jailbreak app installation method if your device has not listed on above.
Phœnix Jailbreak Step guide
You can do Phoenix Jailbreak using Cydia Impactor method or zJailbreak online app.
Cydia Impactor method is somewhat difficult. You must use a Windows or Mac computer, and You have to create a separate Apple ID for this process.
But You can use zJailbreak application manager to do Phœnix Jailbreak process very easily.
Step 1 - Install zJailbreak app manager.
Step 2 - Then You can install Phœnix Jailbreak app to your iOS 9.3.5 device using the zJailbreak app manager.
Step 3 - Tap the install button and wait for few seconds. You will get the following message. Just tap the Install.
Step 4 - After the Installation of Phœnix Jailbreak, You must trust the developer.
Go to Settings--> General -->Then Profile and Device Management to trust the app.
Step 5 - Open the Phœnix Jailbreak app. Then Tap "Prepare for Jailbreak" button.
Step 6 - Then Tap the "Accept" button to accept their terms and conditions.
Step 7 - Then tap "Begin the Installation" link. Then iOS 9.3.5 Jailbreak process will start.
Step 8 - Then you will get an another message.Just tap "Used Provided Offsets" as the following picture.
Step 9 - Jailbreak process will continue. You will get "Storage Almost full" message.
Tap OK iOS 9.3.5 Jailbreak.
Also you can complete the Phoenix jailbreak PC needed method to jailbreak iOS 9.3.5 as semi-untethered.

BetterHomeDepot for iOS 9.1 - iOS 9.3.4

BetterHomeDepot also known as Home Depot Jailbreak is one of the latest jailbreak releases for iOS 9.1 to iOS 9.3.4 versions. However this jailbreak tool only supports to jailbreak all the 32-bit devices. Home Depot is a Semi tethered jailbreak. This jailbreak was done by jk9357 team.
Supported versions - iOS 9.1, iOS 9.1.1, iOS 9.2, iOS 9.2.1, iOS 9.3.1, iOS 9.3.2, iOS 9.3.3 and iOS 9.3.4.
Supported Device- All the 32-bit Device
iPhone 4s, iPhone 5, iPhone 5c, iPad 2, iPad mini 1, iPad 3, iPad 4 and iPod touch 5.
Here is the supported device model according to the iOS version.
iPhone 4S - iOS 9.2, 9.2.1, 9.3, 9.3.1, 9.3.2, 9.3.3, 9.3.4

iPhone 5 (GSM) - iOS 9.3.3, 9.3.4

iPhone 5 (Global) - iOS 9.1, 9.2, 9.2.1, 9.3.2, 9.3.3, 9.3.4

iPhone 5C (GSM) - iOS 9.2.1, 9.3.2, 9.3.3, 9.3.4

iPhone 5C (Global) - iOS 9.3.2, 9.3.3

iPad 2 (WiFi, GSM, CDMA, Mid 2012) -  iOS 9.1, 9.2, 9.2.1, 9.3, 9.3.1, 9.3.2, 9.3.3, 9.3.4
iPad 3 (WiFi) - iOS 9.3.4

iPad 3 (GSM) - iOS 9.3.1

iPad 3 (CDMA) - iOS 9.3.2, 9.3.3

iPad 4 - iOS 9.2.1

iPad Mini (WiFi) - iOS 9.2.1, 9.3.2, 9.3.3

iPod touch 5 - iOS 9.1, 9.3.2, 9.3.3, 9.3.4
Requirements to start the Step guide of Home Depot.
Download MistapePlayerRC3.ipa from following link.
Download Cydia Impactor according OS version.
Turn off the Passcode, Touch ID and Find My iPhone.
A computer running Windows, Mac or Linux.
Home Depot Step Guide
Step 01 - Connect the device with the computer.
Step 02 - Run the Cydia Impactor tool and it will recognize the device connection.
Step 03 - Drag and drop Home depot app IPA file into the Cydia Impactor. Click OK, if you got warning message.
Step 04 - It will ask the Apple ID Username and the Password. Provide it. Then it will install Home Depot app to the iDevice.
Step 05 - Make trust the Home Depot app. Go to Settings --- > General --- > Profiles & Device Management and trust the developer.
Step 06 - Run the Home Depot app on your device. Tap the ‘Prepare for the jailbreak’ button and Do accept. Then click on the ‘Proceed with Jailbreak’ button.
Step 07 - Click on the ‘Begin Installation’ button to start the jailbreak.
Step 08 - Finally it will install Cydia.
Note - After the device reboot, it may disable Cydia. Because of the Home Depot jailbreak Semi - Tethered. Whenever disable Cydia, you may follow the step 05 and step 06 again.

Pangu9 for iOS 9.0 - iOS 9.3.3

Pangu Team has released the jailbreak for iOS 9.1. it supports Pangu9 v1.3.1. If you are still 9.1 user, you can download Pangu's iOS 9.1 jailbreak support version following download links.
Please note - This Jailbreak is not supported for (32bit) iPhone 4S, iPhone 5 , iPhone 5C , iPad 2, 3, 4 and iPod 5 & 6.
Download link Window
Download Pangu9 1.3.1 for Windows
Download link Mac
Download Pangu9  1.1.1 for Mac
iOS 9.1 jailbreak guide with Pangu9
Step 01 - Turn the device into AirPlane mode.
Step 02 - Turn off the Passcode lock.
Step 03 - Get the backup your device.
Step 04 - Make sure it has free storage on your device.
Step 05 - Windows users must Download the Pangu v1.3.1 Windows version. Then run as Administrator. Mac users need to download 1.1.1 Mac version of it. Then just run the downloaded tool.
Step 06 - Connect the device to the computer.
Step 07 - Go head by clicking Start button.
Step 08 - In the middle of the jailbreak process, it will reboot the device one time.
Step 09 - Turn on the AirPlane mode once again.
Step 10 - It has Pangu icon on your device screen now. Run it.
Step 11 - Ignore the storage almost full message by clicking Ok button. It will restart the device again.
Step 12 - Cydia runs on your jailbroken device now.

PP Helper  for iOS 9.2 - iOS 9.3.3

Pangu and the PP Jailbreak teams released PP Helper tool to jailbreak iOS 9.2 to iOS 9.3.3 versions. However it is available Windows version for Mac users only. Chinese version can be used for Windows and Mac users.
Click here to get the PP Helper guide for iOS 9.2 to iOS 9.3.3 jailbreak  with the download link.

Pangu Anzhuang

Install Jailbreak apps from Pangu8 Anzhuang:
You cannot install this Jailbreak app installer from App Store or directly from web URL. You have to use 3rd party app manager such as zJailbreak to install it.
Step 01 - Install zJailbreak from above button. You must enter the device password to install the zJailbreak.
Step 02 - Install Pangu8 Anzhuang from the zJailbreak.
Step 03 - Go to Jailbreak app list and select the app which you want to install.
Step 04 - Select a Jailbreak app and generate the developer code of the app.
Step 05 - Then Paste the developer code of Pangu8 Anzhuang and tap the install link.
Step 06 - Jailbreak app will be installed on your iOS 9.X.X versions automatically.
Note - Some times apps will be installed as mobileconfig, Then you have to enter your device passcode to install it.
Otherwise, apps will be installed as IPA file.

Then you have to confirm the developer of the app before opening it.

Go to Settings -->General -- > Then Profile and Device management to trust the developer.

Also, you can remove apps from "Profile and Device management."


Velonzy is a jailbreak alternative solution for latest iOS versions According to the developer, Velonzy can be used to install jailbreak apps for all the iOS 9 versions too through the Cydia Impactor tool.

Click here to get the Velonzy guide to complete the jailbreak process for iOS 9.0 to iOS 9.3.5 all the 32-bit and the 64-bit devices.

Pangu8 JB Installer

Pangu8 JB installer is another jailbreak alternative solution for latest iOS versions. Also it supports to jailbreak iOS 9 versions too. Click here to check the availability of the Pangu8 JB Installer for your device version.
iOS 11.1 Jailbreak
Alternative jailbreak methods are available to Jailbreak iOS 11.1. These jailbreak methods can be applied all the sub versions of iOS 11 such as iOS 11.0.1, iOS 11.0.2, iOS 11.0.3. Meanwhile of this, Keen Lab jailbroken the iOS 11.1.1 at PoC 2017. Earlier they have demonstrated Jailbreak iOS 11 beta 2 and iOS 10.3.2 at MOSEC 2017.

iOS 10.3.3 Jailbreak
There is no any official jailbreak method for iOS 10.3.3. We do not recommend upgrading to iOS 10.3.3, if you are iOS 9.3.5 user. However, you can use the Anzhuang iOS 10.3.3 Jailbreak app installer  to install some Jailbreak apps for iOS 10.3.3.

Yalu 102
Luca released yalu 102  for iOS 10-10.2 versions. This is a Semi-Untethered method, and currently, this is the latest jailbreak tool for latest iOS version. There are several  jailbreak methods  available with yalu jailbreak.

iPhone X Jailbreak
iPhone X released for the Apple’s 10th Anniversary. iOS 11.1 was the running iOS version of iPhone X, when it released for the public. Because of the higher protection, iPhone X  jailbreak is not an easy task. However Liang Chen proved the possibility of iPhone X jailbreak at PoC 2017.

Cydia for latest iOS versions
Cydia install method may vary according to your iOS version and device model. So you must choose correct Cydia installation method according to those factors. Go to Cydia page and get most compatible Cydia install method according to your iOS version and device model.