iOS 10.3.3 Jailbreak [updated to the iOS 10.3.4]

iOS 10.3.3 Jailbreak

Following Jailbreak solutions available for iOS 10.3.3. Almost all jailbreak tools install Cydia. Now you can downgrade to iOS 10.3.3 with OTA blobs without SHSH.

In addition, iOS 10.3.4 is available for the cellular version of the iPad 4 and the iPhone 5 with security updates & fix the GPS bug.

1) Anzhuang 

You can install popular Jailbreak apps including Cydia to iOS 10.3.3 devices using Anzhuang developer code extraction method. It is a straightforward online Jailbreaking solution for iOS 10.3.3.

2) DoubleH3lix 

Tihmstar recently released H3lix jailbreak tool version named as DoubleH3lix jailbreak with siguza. It supported jailbreaking all the 64-bit devices running iOS 10 versions up to 10.3.3 version as Semi-untethered.  

3) Meridian jailbreak 

PsychoTea, known as Sparkey (@iBSparkes on Twitter) has released Meridian jailbreak for iOS 10.3.3 running 64-bit devices.

4) g0blin jailbreak 

g0blin is a semi-untethered jailbreak tool for iOS 10.3.3 running 64-bit devices. g0blin also supports iOS 10.3, iOS 10.3.1 and iOS 10.3.2 jailbreak.

5) Velonzy 

Velonzy is a jailbreak app installer for iOS 10.3.3 to iOS 11.4.1 versions. Both online and Windows/Mac computer based methods are available to download velonzy.

6) h3lix 

H3lix released as semi-untethered jailbreak for iOS 10.3.3 running all 32-bit devices. This is supported to jailbreak all the iOS 10 versions too.

Other than the above solutions, some jailbreak solutions are available for iOS 10.3.3 under the Jailbreak News.

1) Anzhuang

Anzhuang iOS 10.3.3 Jailbreak app installer is not available at the Apple App Store or any website. You must use the zJailbreak or Xabsi app store to download it.

Anzhuang supports iOS 12.1.4 Jailbreak. It is not compatible with higher versions of iOS 12.2 Jailbreak onwards.

Step guide 

Step 01 – Install zJailbreak or Xabsi from the above buttons. You just need to enter your device passcode during the installation process of zJailbreak or Xabsi.

Step 02 -Open the installed App store (zJailbreak or Xabsi). Install Anzhuang which is available in the jailbreak category.

Step 03 – Now click “Browse the Jailbreak app list” to select an iOS 10.3.3 Jailbreak App.

Step 04 – OK, Select the Jailbreak app from list, tap the generate code, Then copy the code.

Step 05 – Open Anzhuang and paste the code. App will download automatically.

How to Trust the Application

When you open an Enterprise App for the first time, you will receive the message to trust it. Follow the given below instructions to trust the application.

Step 01 – Dismiss the Untrusted Enterprise Developer popup message.

Step 02 – Go to Settings > General > Profile and Device management.

Step 03 – Trust the app.

2) DoubleH3lix Jailbreak

Tihmstar recently released DoubleH3lix jailbreak tool to jailbreak 64-bit devices running all the iOS 10 versions up to iOS 10.3.3 as Semi-untethered. Previously, tihmstar released H3lix jailbreak supported only for 32-bit devices. Both tihmstar’s H3lix jailbreak based on Siguza’s v0rtex exploit.

Before starting the iOS 10.3.3 jailbreak, follow the below instructions.

  • Backup all your data to iTunes or iCloud before the jailbreak.
  • Turn off Find my iPhone during the jailbreak process.
  • Turn off passcode/Touch ID while the jailbreak process.
Step Guide of DoubleH3lix jailbreak

Step 01 – Download the DoubleH3lix IPA and Cydia impactor using the following buttons. Make sure to download Cydia Impactor according to your Computer OS.

Step 02 – Connect your iOS 10.3.3 device to the computer. Open the Cydia Impactor. Select your device from the drop-down menu.

Step 03 – Drag the DoubleH3lix IPA into the Cydia Impactor tool.

Step 04 – Now enter your Apple ID & password. Then, it will start to install the DoubleH3lix app on your device.

Step 05 -Once the installation is done, DoubleH3lix app will be available on your device homescreen. Before opening the app you need to trust the developer profile. General — > Settings — > Profiles & Device Management — > Trust the Enterprise App.

Step 06 – Now go back to homescreen and open the h3lix app. Then tap on “Jailbreak” Button.

Step 07 – Wait until complete the jailbreak process. Finally, it will install Cydia on your iOS 10.3.3 device.

Note – Because the DoubleH3lix tool is a Semi-untethered tool, you have to re-jailbreak your device after every reboot.

3) Meridian jailbreak

Meridian Jailbreak support for iOS 10.3.3 running any 64-bit devices.

It is support for all iOS 10 versions too.

You can install Cydia on your iPhone or iPad using the Meridian Jailbreak tool.

Device compatibility

iPhone 7 & 7 Plus, iPhone 6S & Plus, iPhone 6 & 6 Plus, iPhone SE, iPhone 5S, iPad Air 1 and iPad Air 2, iPad, iPad Mini 2, iPad mini 3, iPad mini 4, iPad Pro 1, iPad Pro 2, iPod Touch 6th Gen

How to Download Meridian Jailbreak

Meridian Jailbreak is an IPA based Cydia Impactor Method. You need MAC or Windows PC support to complete the Meridian Jailbreak process.

Step Guide

Step 01 – Download Meridian IPA and save it to the desktop.

Step 02 – Download Cydia Impactor. Make sure to download according to your computer operating system.

Step 03 – Open Cydia Impactor and select the IPA and drop it into Cydia Impactor.

Step 04 – Enter Apple ID details to start the IPA sideload process.

Step 05 – Wait for sideload complete message.

Step 06 – Once complete, go to Settings > General > Profile and Device management and trust the app.

Step 07 – Open the app and tap the go button.

Step 08 – Wait for the reboot of the device.

Step 09 – Check homescreen for Cydia.

Note: You need to re-jailbreak your device every time you reboot because meridian is Semi-Untethered Jailbreak.

4) g0blin Jailbreak

g0blin Jailbreak is still in beta status, and It’s not stable at this time. We recommend waiting some time until developers release the public version. Cydia may not work with iOS 10.3.3 at this time.

The g0blin jailbreak tool developed by Sticktron and Jake James and this tool based on Siguza kernel exploit. This tool only supports iOS 10.3 to iOS 10.3.3 running 64-bit devices and 32-bit users can use h3lix jailbreak tool.

Requirements before start jailbreak
  • g0blin is still not stable, so we recommended to backup before starting the jailbreak.
Compatible devices for g0blin

iPhone 5S /iPhone 6/6 Plus /iPhone 6S/6S Plus /iPhone SE.

iPad Mini 3 /iPad Mini 4 /iPad Air 2 /iPad Pro 12.9-inch 1st generation (only iOS 10.3.3)

Step Guide to install g0blin iOS 10.3.3 – iOS 10.3 Jailbreak

Step 01 – Download g0blin jailbreak IPA.

Step 02 – Download Cydia impactor.

Step 03 – Connect your iOS device to Computer.

Step 04 – Launch Cydia Impactor and drag and drop g0blin jailbreak IPA to Cydia Impactor to start sideloading.

Step 05 – Cydia Impactor now requires your Apple ID details and submit the details.

Step 06 – Wait for sideloading complete and once complete it you will have g0blin app on your device home screen.

Step 07 – Now you can disconnect the device from the computer.

Step 08 – You cannot launch the app until trust the ap. Go to Settings > General > Profiles & Device Management and trust the app.

Step 09 – Launch the g0blin app and tap jailbreak button.

Step 10 – Wait for the already jailbroken message.

Step 11 – Now you should see Cydia on your homescreen.

Note – You should use g0blin jailbreak respring instead of Cydia respring.

5) Velonzy

Velonzy is a new method to install Jailbreak apps for iOS 10.3.3. Velonzy makes you a virtual Apple developer and allows you to install the Jailbreak apps to your iOS 10.3.3 device very easily. 

Velonzy is a donateware. Normally, you must donate to the Velonzy team to get their service. However, the Pangu8 team donated them and they provide free service to install Velonzy to your iOS 10.3.3 devices. There are two methods available as follows to install Velonzy. Recommend to use both methods to install more apps to your device. 

Velonzy Online method

Step 01 – Click here to get free Velonzy access.

Step 02 – Then, tap the “Register UDID” button.

Step 03 – It will be redirected to the UDID Submitter initiation menu. Then, provide your device passcode to continue. However, nothing will be installed on your device at this point.

Step 04 – The UDID will be submitted to the Velonzy database, after the installation.

Step 05 – Finally, you can install the Velonzy Online Jailbreak app installer to your device.

Step 06 – Now, Browse the jailbreak app categories from the Velonzy iOS app list. Select any jailbreak app and generate the developer code of the selected app. Paste the copied code into the Velonzy app.

Step 07 – You can install any number of jailbreak apps using this method. Also, you can only install Cydia with the Velonzy Online method.

Velonzy PC method

Follow the given bellow step guide to install Jailbreak apps for iOS 10.3.3 device using Velonzy PC method.

Step 01 – Get Velonzy free access from the following button.

Step 02 – Click the Register UDID button now.

Step 03 – Download Velonzy from following buttons according to your computer OS.

Step 04 – Go to the Velonzy jailbreak IPA list and provide the UDID of your device. Then it will download the jailbreak iPA to your computer.

Step 05 – Open the Velonzy app installer. Then drag the jailbreak IPA into the app installer.

Step 06 – It will ask for your Apple ID and Password. Then it will install jailbreak apps to your device.

Step 07 – Before opening the jailbreak apps, just trust the developer of the app.

6)H3lix Jailbreak

The h3lix jailbreak was released to jailbreak iOS 10.3.3 to iOS 10 by tihmstar in collaboration with Siguza as Xmas gift. h3lix compatible with all 32-bit devices and its reject the 64-bit devices. 64-bit device users can use the above jailbreak alternative methods. H3lix is semi-untethered jailbreak and based on Siguza’s v0rtex exploit.

Please follow the below instructions before starting the iOS 10.3.3 jailbreak.

Prerequisites :
  • Make sure to backup all your data to iTunes or iCloud before the jailbreak.
  • You should turn off Find my iPhone during the jailbreak process.
  • You should turn off passcode/Touch ID while the jailbreak process.
Installation Step Guide to install h3lix

Step 01 – Download the h3lix IPA and Cydia impactor from following buttons.

Step 02 – Connect your device to the computer. Open the Cydia Impactor. Select your device from the drop-down menu.

Step 03 – Drag the h3lix IPA into the Cydia Impactor tool. (If you get warning appears, click ‘OK’.)

Step 04 – Now you will be asked to enter your Apple ID & password. Enter your Apple ID & password. Then the h3lix app will start to install on your device.

Step 05 – Once the installation is done, the h3lix app will be available on your device homescreen. Before opening the app you need to trust the developer profile. 

General — > Settings — > Profiles & Device Management — > Trust the Enterprise App.

Step 06 – Now go back to homescreen and open the h3lix app. Then tap on “Jailbreak” Button.

Step 07 – It will take a few minutes to complete the jailbreak process, and finally Cydia icon will appear on your device homescreen.

Note – If there is no Cydia, please repeat the jailbreak process until it is successful.

When you reboot your device, all the jailbreak features will be disabled because of the Semi-untethered jailbreak. To fix this, re jailbreak the device.

10.3.3 OTA Downgrade Script for the iPhone 5s using checkm8

10.3.3 OTA Downgrade Script for the iPhone 5s has been released. Here is a new method to Downgrade with OTA blobs to iOS 10.3.3 without SHSH using checkm8. This was released by Matthew Pierson.

Device compatibility 

iPhone 5s (6,1 and 6,2), iPad Air (iPad4,1 iPad4,2 and iPad4,3) and iPad Mini 2 (iPad4,4 and iPad4,5)

(No iPad4,6 support ever because it doesn’t have 10.3.3 OTA signed as it shipped with 7.1 not 7.0)

How to Downgrade
  • Make sure you have the 10.3.3 IPSW in the main directory where “” and the other scripts are. You should have at least 10 GB free on your SSD/HDD.
  • Now run the script in this order. 
  1. chmod +x *.sh”
  2. “./”
  3. “./”
  4. Place the device into DFU Mode and connect to the computer.
  6. “./”
  7. “./”

Finally, you can enjoy the iOS 10.3.3 version on your iPhone or iPad.

Note – If something goes wrong, it might break your iPhone. Be careful!

Jailbreak News

05th Sep 2018 – iOS 10 to iOS 10.3.3 TotallyNotSpyware Safari Jailbreak developers.

Someone named Jake Blair has tweeted about the safari jailbreak developers suddenly. However, @JakeBlair420 created this twitter account a couple of days ago. There is no official source to prove that they are the developer yet. Check out the below screenshot.

04th Sep 2018 – Safari Jailbreak released for iOS 10 to iOS 10.3.3 devices. jailbreak announced for iOS 10 to iOS 10.3.3 versions. This Safari jailbreak is compatible with all 64-bit  iPhone, iPad, or iPod touches. This jailbreak is based on the pwn_i8.js and v0rtex exploits.

However, this totally-not.spyware Safari jailbreak does not mention the developer.

Even though most recent jailbreak releases are semi untethered, this is fully untethered jailbreak as it is a remote jailbreak. 

The specialty of this safari jailbreak is you can jailbreak your device without Cydia Impactor. That is you do not need to use a computer at all.

Other Jailbreak Methods

  • Pangu8 Jailbreak Installer

We have discontinued the Pangu8 JB installer. This tool has been using Velonzy database to register UDID. Now the Velonzy team is no longer supporting us to access their database.

We are sorry for the inconvenience.

Download the Pangu iOS 10.3.3 Jailbreak app installer from the following button for Windows computer.
Please visit this page from your PC/Mac to download. 

Please note – This tool doesn’t Jailbreak your device to install the Cydia. It only installs the most popular Jailbreak apps to your iPhone, iPad or iPod.

Step Guide to Install Jailbreak apps for iOS 10.3.3

Compatible device list

all iOS 10.3.3 devices.

Step 01 – Install the Pangu JB app installer from above button and Cydia Impactor.

Step 02 – Connect your device to your computer.Download the IPA file which is signed from your UDID code.

How to sign iOS 10.3.3 Jailbreak apps from your UDID

Step 03 – Click the Cydia Impactor button of the Pangu8 Jailbreak installer.

Step 04 – Then Drag and drop the downloaded IPA file of the Jailbreak app.

Step 05 – Now you must Login to the Cydia Impactor using Your iTunes account. It is better if you can create a separate iTunes account to install Jailbreak apps to iOS 10.3.3.

(You have to log out from your default iTunes account and log in the new account when you installing the Jailbreak apps).

Step 06 – It takes about a minute to install the Jailbreak app to your device.

Step 07 – OK, Now go to Settings, General and Profile and Device Management on your iTunes account.

Then you can see your iTunes account ID as the developer of this iOS 10.3.3 Jailbreak app.

Sign and Download IPAs of JB apps.

We have categorized some of the most popular Jailbreak applications of this page. 

please Note – You must sign these IPA’s from your UDID code before downloading them. You can only install Jailbreak apps for iOS 10.3.3 developer beta version only.

First of all, You must get your UDID code.

01 – Connect your device to the computer.

02 – Now open iTunes and click twice as image shown.

03 – Then Copy the UDID code.

Jailbreak Scams

Spring Jailbreak

iOS Security Researcher & Cydia developer, DevelopApple has released Spring jailbreak for all the 64-bit devices running iOS 10.3 to iOS 10.3.3 versions. Method was found using Siguza’s v0rtex exploit, qwertyuiop’s yalu102 kpp bypass and the Xerub’s patchfinder. According to the developer, it can jailbreak all the A7 to A9 devices using the latest Spring beta 2 IPA to install Cydia. However, there was nothing to install.

Compatible devices

All the A7 to A9 devices (64-bit devices only)

iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone SE

iPad (5th generation), iPad Pro (12.9-inch), iPad Pro (9.7-inch)

iPad Air, iPad Air 2, iPad mini 4, iPad mini 3, iPad mini 2

iPod touch (6th generation)

Compatible Versions

iOS 10.3.3, iOS 10.3.2, iOS 10.3.1, iOS 10.3

Note – We tested Spring jailbreak using above few devices running iOS 10.3.3 and iOS 10.3.1 versions. Jailbreak process failed for almost all tested devices. Here is the tested step guide. However, we highly recommended not to use the below guide. Because Spring Jailbreak is totally fake.

Step Guide of Spring Jailbreak

Step 01 – Download Spring IPA using the following button.

Step 02 – Download the Cydia Impactor tool using the following button. Make sure to download it according to your computer OS.

Step 03 – Connect your device with the PC or Mac and open the Cydia Impactor tool.

Step 04 – Provide your Apple ID details now. Then it will be available as a Spring app on your device homescreen.

Step 05 – Trust the certificate of Spring App. Open Settings —> General —> Profiles & Device Management. Trust the app now.

Step 06 – Run the Spring App, which is installed on your device. Then tap the jailbreak button.

Step 07 – Normally, It will take a few minutes to complete the jailbreak process here to install Cydia. However, Spring Jailbreak failed to complete the jailbreak process. There were many errors. Therefore highly recommend avoiding this fake jailbreak.  

iOS 13 – iOS 13.4 Jailbreak

Apple released iOS 13.1 as the first update for the major iOS 13 version. Now it has iOS 13.1.1, iOS 13.1.2, iOS 13.1.3, iOS 13.2, iOS 13.2.2, iOS 13.2.3, iOS 13.3, iOS 13.3.1 & iOS 13.4 beta versions too. Uncover released for iOS 13 – iOS 13.3 jailbreak. Checkra1n released for iOS 13 – iOS 13.3.1 Jailbreak. It has Hexxa Plus up to iOS 13.4 Jailbreak to install jailbreak apps. Also it can use Trimgo virtual jailbreak apps to experience virtual web based Cydia on your iOS 13 – iOS 13.3 devices. Apricot iOS also gives virtual jailbreak feature on your iOS 13.1 / iOS 13.1.1 / iOS 13.1.2 / iOS 13.1.3 / iOS 13.2 / iOS 13.2.2 / iOS 13.2.3 / iOS 13.3 / iOS 13.3.1 / iOS 13.4 beta devices. Now zJailbreak is compatible with iOS 13 – iOS 13.4 to get these jailbreak solutions.

Unc0ver Jailbreak

Now Unc0ver Jailbreak added support for iOS 13 – iOS 13.3 Jailbreak A8X to A13 device support. Previously it was compatible with iOS 12.4.1 A12 iPhone models. Also, it is compatible with iOS 12.4 & iOS 12.2 to iOS 11 versions. This is the most reliable jailbreak tool developed by Pwn20wnd & the team. This tool initially released for iOS 11 to iOS 11.3.1 as Electra replacement. Then Unc0ver tool upgraded for iOS 11.4 / iOS 11.4.1 / iOS 12 – iOS 12.2 & iOS 12.4 jailbreak. Recently he added Unc0ver support to iOS 12.4.1 iPhone XS, XS Max, & XR. However, this is not compatible with iOS 12.4.2 and higher.


Chimera Jailbreak has been released for iOS 12 to iOS 12.2 & iOS 12.4 with Sileo. Sileo is Cydia replacement Package manager. Sileo is developed by Electra Team. Sileo consists of features such as Cydia supported repositories will work with Sileo without additional configurations & Unsupported tweaks will be filtered out.


Worldwide Developers Conference, known as WWDC is a technical conference organized by Apple to introduce their new software and technologies to software developers. WWDC was held annually in California and commenced in 1983 in Monterey, California. The participant can test some of these products in hands-on labs with Apple engineers.

Apple held its 29th Annual Worldwide Developers Conference WWDC at the McEnery Convention Center in San Jose, California from 4th- 8th June 2018 and previewed iOS 12. A Couple of months ago 30th WWDC 2019 also took place at the same place and announced iOS 13.  

Jailbreak iOS 11.2.5

Apple released iOS 11.2.5 version after testing & developing it through 7 beta versions. Electra & Unc0ver Jailbreak available for iOS 11.2.5. Also, It has two jailbreak app installer method for this version. One is Anzhuang app installer. Other is the Velonzy app installer. Both of these methods allow you to install jailbreak apps to iOS 11.2.5 version. 

Houdini Semi Jailbreak

Houdini, Semi Jailbreak method has been released for iOS 11.1.2 to iOS 11 and iOS 10.3.2 to 10. You can install the Houdini using Cydia impactor or zJailbreak online app store. Houdini allows you to install Jailbreak themes and tweaks for your iPhone or iPad. Houdini Tool recently upgraded by releasing Houdini beta 3 for iOS 11.3.1 to iOS 11.2.

Saigon Jailbreak

It is possible to jailbreak iOS 10.2.1 with Saigon tool. However, Saigon jailbreak tool supports jailbreak 64-bit devices only. Also, it has Meridian, DoubleH3lix  jailbreak to install third-party apps. H3lix Jailbreak tool available for iOS 10.2.1 running 32-bit device users.

Triple Fetch Exploit

Ian Beer, A New hacker exploited iOS 10.3.2. It is a good sign for upcoming Untethered or Semi-tethered Jailbreak for iOS 10.3.3. However, Anzhuang and zJailbreak are only Jailbreak alternative methods for iOS 10.3.3.
Read more about Triple Fetch Exploit.


Luca Todesco released extra_recipe+yaluX for iOS 10 – 10.1.1 stable jailbreak. So download extra_recipe+yaluX and get the stable jailbreak for your iPhone 7 / 7+ devices. Visit Yalu jailbreak page to download Yalu’s new method.


zJailbreak is the alternative jailbreak solution for all latest iOS versions. Also, zJailbreak is a must have application for the latest iOS releases because of several reasons. Now you can install zJailbreak with us or zJailbreak official page.