Yalu jailbreak [Online Jailbreak]

Yalu Jailbreak

Yalu Jailbreak available for iOS 10 – iOS 10.2 jailbreak. Find all Yalu Jailbreak tools from this page. 

Yalu jailbreak developed by famous iOS researcher, Luca Todesco. He is known as qwertyoruiop on twitter.

Also, you can find Luca Todesco’s latest iOS 13 jailbreak & iOS 12 Jailbreak achievement through this page.

Yalu Jailbreak for iOS 10 – iOS 10.2 

There are many modified / Fake versions of Yalu jailbreak  other than above yalu jailbreak methods. However, the recommendation not to use fake yalu tools and modified versions are not necessary at all.

Yalu online jailbreak (PC free)

This is a 100% PC-free online jailbreak method. Users can jailbreak iOS 10 to iOS 10.2 versions.You Can install Yalu 102 through Silzee Online JB app and it needs having zJailbreak or Xabsi app store first. 

Support devices – iPhone 6s Plus,  iPhone 6s, iPhone 6 Plus,  iPhone 6, iPhone 5s, iPhone SE, iPod Touch 6G, iPad Mini 2, iPad Mini 3, iPad Air 2, iPad Pro, iPad Mini 4.

Support versions – iOS 10.2, iOS 10.1.1, iOS 10.1, iOS 10.0.3, iOS 10.0.2, iOS 10

Step Guide 

Step 01 – Install zJailbreak/Xabsi from above install buttons according to instructions. 

Step 02 – Go to zJailbreak or Xabsi app. Install Silzee online JB app. (Provide the passcode during the process.)

Step 03 – Open the Silzee Online JB app and tap on the Yalu 102 button. It will begin to install the Yalu app on your device.

Step 04 – It will take a few times, and Yalu102 will appear on your homescreen once the process is complete.

Step 05 – Now launch Yalu102 app from your device and Tap on the “go” button.

Step 06 – Once the Jailbreak process complete, Cydia will be available on your device. 

Yalu102 Jailbreak(PC required)

Support devices – iPhone 6s Plus,  iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone SE, iPod Touch 6G, iPad Mini 2, iPad Mini 3, iPad Air 2, iPad Pro, iPad Mini 4.

Support versions – iOS 10.2, iOS 10.1.1, iOS 10.1, iOS 10.0.3, iOS 10.0.2, iOS 10

Yalu102 download files:

Yalu102 jailbreak has some special requirements and users should complete them before start. Please do not skip these steps. Otherwise you will have failed messages during the process.

Prerequisites 
  • Download Cydia impactor according to your computer operating system. 
  • Device data should be backup before start. 
  • Turn off Find my iPhone and turn it on again after complete jailbreak.
  • Turn off Touch ID and normal passcode until you finish jailbreak.
  • Latest iTunes version.
Step Guide

Step 01 – Connect your device to Computer by using a USB cable.

Step 02 – Now open cydia impactor application. 

Step 03 – Select Yalu IPA file and drop it to Cydia impactor application.

Step 04 – Now Cydia impactor requires your Apple ID and password. Enter your details. 

Step 05 – Waits for IPA sign and Once IPA sign process finish, you will have Yalu app on your device homescreen.

Step 06 – You cannot move any further steps until verify it. 

Settings > General > Profile and device management and find Yalu app. Tap the trust button.

Step 07 – Now go back  to homescreen and open Yalu app. 

Step 08 – Tap Go option. Then your device will be restarted.

Step 09 – Once restart go to the home screen for Cydia

Note– If Cydia is not installed for the first time,repeat the above process several times to install Cydia correctly.

Yalu extra_recipe+yaluX tool 

Support device – iPhone 7 / 7 +

Support version – iOS 10.1.1

Yalu extra_recipe+yaluX download files:

Step Guide – Click here to get the guide. You can follow  the same Yalu102 jailbreak guide for this.

Yalu mach-portal tool support

Support devices – iPhone 7, iPhone 7 Plus, iPhone 6s, iPad Pro

Support versions – iOS 10 & iOS 10.1.1

Yalu mach_portal download files

This tool has expired now. You can try Yalu extra_recipe+yaluX tool instead of this.

Online based Cydia reactive method

Supported devices and versions – All the jailbroken devices using Yalu102 and Yalu extra_recipe+yaluX tools.

Step Guide

Step 01 – Just use the device’s web browser to load jbme.qwertyoruiop.com. 

Step 02 – Click on the “GO”. 

Step 03 – After “Going it” it will give you a message. Close it and lock your device screen. 

Step 04 – The device will reboot, and it will be reactive to Cydia.

Jbme Method FAQ

* What is Luca’s jbme method? 

It is an online based Cydia reactive method. Certificate expiration issue also is fixed. As Semi-tethered Pangu’s iOS 9.3.3 tool wants to run every time you reboot the device. Because Cydia will crash after the reboot according to semi-tethered.  Luca made this method instead of running the Pangu app again and again.

* Is this permanent untethered method? 

No. It is not. According to semi-untethered jailbreak, you always lose Cydia  every time you reboot your device, even if you use this method. Luca confirmed this method is not the same for untethered tool.

  • How many times can this method be used?

Any number of times.

  • What is the specialty of this method?

PC or Mac free. Don’t want to download any files or run.

Never asks to put AirPlane mode or disable Passcode lock.

32-bit devices are not supported.

Yalu Jailbreak for latest versions

iOS 14 – iOS 14.2

It seems @qwertoruiop is working for something new iOS 14 Jailbreak. He just hinted through his official twitter account. Also, he mentioned that it isn’t about the Checkra1n. They are working for the MOSEC 2020 conference a couple of months ago. The Pangu team demonstrated iOS 14 beta exploiting techniques at the conference. There must be some new iOS Jailbreak collaboration tool.

iOS 13 – iOS 13.7

Yalu Jailbreak does not support iOS 13 – iOS 13.7 versions.

Now it has Unc0ver / Odyssey  tools available up to iOS 13.5 Jailbreak. & CheckRa1n Jailbreak up to iOS 13.7. Also, there is Hexxa plus repo extractor available up to iOS 13.7.

However, Luca is working on a new Checkra1n jailbreak instead of Yalu Jailbreak. Checkrain is based on the Checkm8 exploit. It has been released up to iOS 13.7 Jailbreak version running A5-A11 powered devices. 

Here are his previous works for the Checkm8 based Checkra1n tool released so far. 

He tested the new method on iPhone SE on iOS 13.1.2 and iPhone X on iOS 12.4.

Also, Luca attended iOS 13.1.1 jailbreak with checkm8 exploit by axi0m. This newly released open source Checkm8 exploit is a different kind of tethered exploit. It works on iPhone 4S to the iPhone X.

Previously, Luca tried his exploit to achieve iOS 13.1 Jailbreak. But it didn’t work. He mentioned it on his official twitter as follows. 

Also, Apple released iOS 13.1 beta version on the following day Luca has achieved iOS 13 beta 8 jailbreak.

Previously, as soon as iOS 13 beta 1 released Sparky achieved 0-day vulnerability.  He has mentioned qwertyoruiopz to his twitter post. Later he published a screenshot of Cydia on iPhone 10,4 running on iOS 13 with Luca. 

After that once iOS 13 beta 2 was released, Luca confirmed that tfp0 works with iOS 13 beta 2. Maybe they are planning to release iOS 13 jailbreak together. Otherwise it will be used for their iOS security research. 

iOS 12 – iOS 12.4.8

After a Long break, Luca attended for iOS 12 Jailbreak.

Luca successfully jailbreak iOS 12 on iPhone Xs Max. He informed it via his twitter account, and now he has restored the stock iOS 12. Also, this is not the first time these A12 devices have been jailbroken. Last Month Pangu team had Jailbroken the iPhone XS too.

Previously, Luca tweeted that he already bypassed this pointer authentication codes (PAC) used to protect against exploitation on iOS 12 final version running A12 and S4 chips.

Also, he has published a video on his official Twitter page about Jailbreak 12 beta of iOS 12. According to the qwertyoruiop, it is a full chain demo about the webkit+sandbox+kernel exploit. Also, he has mentioned the secret technique for jailbreaking any device easily bypassing all mitigations. 

Watch the following Video.

Yalu jailbreak modified/fake versions

1) Yalu103 Jailbreak 

Some web pages have announced Yalu103 IPA file is available for developers to jailbreak iOS 10.3 to iOS 10.3.2 versions and  Luca will develop the current version more and release it soon. Also, they have mentioned Support devices and Versions as follows.

Support devices – iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone SE, iPod Touch 6G, iPad Mini 2, iPad Mini 3, iPad Air 2, iPad Pro, iPad Mini 4.

Support versions – iOS 10.3, iOS 10.3.1, iOS 10.3.2 to iOS 10.3.3.

Also, they have published the IPA and Video also. We have added the Video and Download link below.

However, we have tried this tool and nothing happens. This is a totally fake tool. So please stay away from this method. 

Download Yalu103 IPA

2) Yalu Dark jailbreak for iOS 10

Yalu Dark modified by GeoSn0w (@fce365). That is the different design of Yalu Jailbreak fork for iOS 10.0 to iOS 10.2 by qwertyuiop.  It altered interface (dark), certification status, and Mobile Substrate disables, enable toggle.

However, Yalu Dark is one of the first forks of yalu102. It has no significant changes other than the dark interface. It has bugs and the normal features which are available with original yalu102. 

3) Absinthe for Yalu102 jailbreak

The Absinthe version of yalu102 jailbreak for iOS 10.2 created by Devsignerz and It just adds the Absinthe wallpaper to the background of the yalu102 app.